StationPro Master Station Controller

Kit Descriptions & Ordering Information

Ordering StationPro parts is an easy two-step process. First, you order an SP-I or SP-II "semi-kit" from Harbach Electronics, LLC, though the secure order form. Each available kit is described below. Next, you order the remaining components from Mouser Electronics, our recommended supplier and an international distributor of electronics components. Clicking on one of the following links will take you to an already-filled-out shopping cart on the Mouser Electronics secure website. You can change quantites and add or delete individual parts, as desired, and then check out in the normal way.   To order Mouser SP-I Parts, click HERE To order Mouser SP-II Parts, click HERE  To order Mouser SP-II Upgrade Parts, click HERE   Your Mouser order will cost approximately $160 (SP-I) and $300 (SP-II). Note: Mouser accepts orders from international customers and ships worldwide.    Shipping Charges: A Flat-Rate USPS Priority Mail shipping charge of $12 (USA), $25 (Canada), $59 (other international) per kit will be added when you check out. Unfortunately, I can't combine shipping for multiple orders, because each kit is individually packed and shipped.

 

Summary of Available Kits   SP-I: StationPro I Semi-Kit SP-II: StationPro II Semi-Kit SP-UP: SP-I Upgrade Semi-Kit (to upgrade an SP-I to an SP-II) SP-POD: Additional transceiver pod kits, sold in lots of three only
Kit P/N	Price	Contents	Description
SP-I/UP COMBO	SOLD OUT	SP-I KIT COUPLED WITH SP-UP UPGRADE KIT	Contains all components shown below for the SP-I and SP-UP kits to make an SP-II
SP-I	SALE $122.50    REG. $245	1 - main circuit board 1 - SP-I front panel circuit board 1 - rear panel circuit board 1 - SP-I jumper circuit board 1 - RF relay circuit board 2 -Transceiver pod circuit boards 1 - SP-I custom controller enclosure 1 - RF relay custom enclosure 2- 8 pin chassis mount mic jacks 2 - hardware packs	Contains the seven (blank) printed circuit boards and two custom enclosures required to build the SP-I. Also contains two standard 8 pin mic jacks, two hardware packs, and a spiral bound operating and assembly manual
SP-II	SALE $220    REG. $280	1 - main circuit board 1 - SP-II front panel circuit board 1 - rear panel circuit board 1 -SP-II microcontroller circuit board 1 - RF relay circuit board 3 -Transceiver pod circuit boards 1 - SP-II control unit enclosure 1 - RF relay enclosure 1 - PIC 16C54C pre-programmed integrated circuit 2- 8 pin chassis mount mic jacks 2 - hardware packs	Contains the eight (blank) printed circuit boards and two custom enclosures required to build the SP-II, plus a preprogrammed IC used as an LCD driver, two 8pin mic jacks, two hardware packs, and a spiral bound operating and assembly manual
SP-UP	SOLD OUT	1 - SP-II front panel 1 - SP-II front panel circuit board 1 - microcontroller circuit board 1- transceiver pod PCB	Contains one SP-II front panel, one SP-II front panel printed circuit board, one transceiver pod circuit board, and a preprogrammed IC used as an LCD driver, needed to uprade an SP-1 to an SP-II. Order separately the necessary remaining components by downloading the preformatted order list
SP-POD	$20	3 - Extra transceiver pod circuit boards. Note: two (SP-I) or three (SP-II) pod printed circuit boards are supplied with semi-kit orders. (Shipping is Free to all buyers)	Contains three additional pod printed circuit boards Order separately the necessary remaining component, by downloading the preformatted order list
SP-NET	FREE (supplied on request to builders of two or more SP-II semi-kits)	1 - station select printed circuit board    1- Assembly instructions and parts list	Contains one circuit board for building the remote relay unit to network two or three SP-II station controllers. Builder must supply the other necessary parts. Note that the Hammand die-cast enclosure in the parts list is not pre-punched or silkscreened