SS-100 Universal Soft-Start The SS-100 performs the same functions as the SS-201 or SS-221, but is designed to be installed in any amplifier or vintage radio. The soft-start mounts inside the amplifier or radio and safely limits inrush current to protect hard-to-find and costly-to-replace switches, tubes, filter capacitors and high voltage transformers. The kit includes power resistors for 220VAC mains operation.  If the amp is operated on 110VAC mains, the resistors must be changed to 10-ohm 10-watt.  These may be ordered on the website (RES-121).   Our Price $23.00 - Shipped in the USA - International shipping cost to be added.

BF-101 Replacement Bumper Feet for all Heathkit SB-Series Amplifiers The BF-101 is a new set of 6 bumper feet for all Heathkit SB-series amplifiers. The package includes 4 large feet and 2 small feet for risers. They are made of polypropylene so they will not go flat like the old rubber feet.         Our Price $4.00 - Shipped in the USA - International shipping cost to be added.

BRK-221 Replacement Circuit Breaker for all Heathkit SB-Series Amplifiers The BRK-221 is a replacement 10A 125-250VAC circuit breaker for all Heathkit SB-series amplifiers. Replace those tired old, worn-out breakers with new replacements.            Our Price $6.00 - Shipped in the USA - International shipping cost to be added.

RES-102 20 Ohm 10 Watt Resistors for the SS-100 Replacement 20 Ohm 10 Watt resistors for the SS-100 universal soft-start module for 240VAC mains operation. Sold in sets of two (2).         Our Price $1.50 - Shipped in the USA - International shipping cost to be added.

RES-121 10 Ohm 10 Watt Resistors for the SS-100 10 Ohm 10 Watt resistors are sometimes required for the SS-100 to properly operate in an amplifier or vintage radio operating on 110 VAC mains.  Just replace the 20 Ohm resistors in the kit with these.  Sold in sets of two (2).   Our Price $1.50 - Shipped in the USA - International shipping cost to be added.

RM-2200 Replacement Rectifier/Metering Board for the Heathkit HL-2200 The RM-2200 is a replacement rectifier/metering board for the Heathkit HL-2200. It features modern 1000PIV 3A diodes, new meter shunt resistors, a precision high voltage meter divider string and a high-current zener diode replacement string. The board also features built-in meter protection diodes.   Our Price $32.00 - Shipped in the USA - International shipping cost to be added.

CP-210 Set of Eight (8) 220uF 450VDC Filter Capacitors with SEMS Screws The CP-210 is a set of eight (8) 220uF 450VDC electrolytic capacitors suitable for replacement of filter capacitors in many amplifiers such as Ameritron, Henry, Amp Supply and in the Heathkit SB-1000.  A set of sixteen (16) SEMS mounting  screws are also included. These are the same brand new, high quality Cornell-Dubilier capacitors used in the FB-220.         Our Price $98.00 - Shipped in the USA - International shipping cost to be added.

CAP-220 22uF 160VDC Axial Electrolytic Capacitor This is a replacement electrolytic capacitor for the relay power supply in the Heathkit SB-Series amplifiers.  It is a direct replacement for C4 in the SB-220/SB-221 or C3 in the SB-200/SB-201.  The original capacitor in the amplifier often dries out and leaks voltage to chassis ground causing problems in the relay circuit.   Our Price $2.00 - Shipped in the USA - International shipping cost to be added.

CAP-221 2.2uF 250VDC Axial Electrolytic Capacitor This is a replacement electrolytic capacitor for the relay power supply in the Heathkit SB-Series amplifiers.  It is a direct replacement for C19 in the SB-200/SB-201.  The original capacitor in the amplifier often dries out and leaks voltage to chassis ground causing problems in the relay circuit.   Our Price $1.50 - Shipped in the USA - International shipping cost to be added.